{"projects":[{"actual_hours":185.0,"actual_total_cost":1140000.0,"admin_url":"/rfq/admin/projects/30","certifications":[],"complexity":"medium","customer":"Design Tech i Smedjebacken AB","description":"Spare-parts / hardware-refresh kit for an existing 'ATF079 Clearing Test' system \u2014 NI PXIe-based test/DAQ hardware (PXIE-8822 controller, SCB-68A connector block, 2\u00d7 Samsung 870 Evo 2TB SSDs, SanDisk 64GB dual USB drive, plus a 3-year NI hardware service plan). Non-mechanical procurement \u2014 no load object, motion, or mechanical scope. Cost data incomplete: invoice coverage only 12.6% of the 1.14 MSEK order value; do not use as a price or effort benchmark.","drawing_number":"","earned_sek":319315.0,"fetch_period":"202605","id":30,"invoiced_sek":342000.0,"operations":["projektledning","h\u00e5rdvara","dokumentation","mjukvara","verifiering","konstruktion","ink\u00f6p"],"order_value_sek":1140000.0,"profit_margin_pct":42.0,"project_number":"ATF079","project_type":"other","status":"ongoing","tags":[],"title":"ATF079 Clearing Test Spare Part Kit","tool_self_weight_kg":null,"year":2026},{"actual_hours":252.0,"actual_total_cost":381598.0,"admin_url":"/rfq/admin/projects/21","certifications":[],"complexity":"","customer":"Prevas Test & Measurement AB (DVel)  Fabriksgatan 2C","description":"","drawing_number":"","earned_sek":337913.0,"fetch_period":"202605","id":21,"invoiced_sek":0.0,"operations":["projektledning","konstruktion","ink\u00f6p"],"order_value_sek":381598.0,"profit_margin_pct":27.2,"project_number":"PVL0702","project_type":"other","status":"ongoing","tags":[],"title":"PVL0702 Prevas DVel Test & Measurement - Backer DUT-enclosure","tool_self_weight_kg":null,"year":2025},{"actual_hours":104.7,"actual_total_cost":130975.0,"admin_url":"/rfq/admin/projects/18","certifications":[],"complexity":"medium","customer":"ABB Robotics Sweden AB","description":"This project concerns the design, calculation, and manufacture of a set of manual press/assembly tools (monteringsverktyg) used to press bearings and seals into a cradle-type housing, referencing ABB robot component numbers (3HAC094934-001, 3HAC094936-001, 3HAC094937-001). The toolset consists of three distinct assembly tool variants (PVL0319-0000, PVL0319-1000, PVL0319-2000), each comprising a custom-machined mandrel (dorn), anvil (moth\u00e5ll), drawbar (dragst\u00e5ng), and standard fastening hardware. FEA calculations (SolidWorks SimulationXpress) were performed on key components, confirming adequate safety margins: the main disc component in 34CrNi steel shows max von Mises stress of ~450 MPa against a yield limit of 700 MPa (SF 1.4), and the M16 grade 10.9 threaded rod is rated for 12 tonnes with an applied load of 3 tonnes (SF 4). The full order scope includes design, FEA, procurement of machined parts from external suppliers (Finntorpets Mekaniska AB and S\u00f6rby J\u00e4rn & Metall), post-machining surface treatment (black oxidising/svartoxidering), and delivery of three complete tool assemblies plus a revised replacement drawbar.\n\nS\u00e4kerhetsinformation: Threaded drawbar (M16 grade 10.9) rated for 12 tonnes, applied load 3 tonnes (SF 4). Main disc component SF 1.4 against yield. Ensure correct mandrel variant is selected per bearing/seal position to avoid component damage.","drawing_number":"PVL0319-0000","earned_sek":162591.0,"fetch_period":"202605","id":18,"invoiced_sek":130975.0,"operations":["pressing","fixation","assembly_fixture","manual_operation","translation"],"order_value_sek":273438.0,"profit_margin_pct":38.7,"project_number":"PVL0319","project_type":"production_equipment","status":"ongoing","tags":[],"title":"PVL0319 Pressa lager och t\u00e4tning i vagga","tool_self_weight_kg":1.93,"year":2023},{"actual_hours":0.0,"actual_total_cost":23000.0,"admin_url":"/rfq/admin/projects/19","certifications":[],"complexity":"simple","customer":"ABB Robotics and Motion","description":"This is a lifting tool (lyftredskap) designed to lift objects with a bolt-circle pattern of \u00d8110 mm with three threaded M12 holes at 120\u00b0 spacing \u2014 specifically a gear wheel (kugg Z4). The tool features three M12 clamping knobs arranged on a circular plate and a central lifting eye (lyft\u00f6gla), and is CE-marked in accordance with the EU Machinery Directive 2006/42/EG. The load's centre of gravity must be centred under the lifting eye during use.\n\nS\u00e4kerhetsinformation: The tool must only be used for its intended purpose; all three M12 clamping knobs must be fully locked before lifting as it is possible to engage the tool without locking it, risking load drop. Safety shoes (skyddsskor) are required PPE.","drawing_number":"PVL0692-0000","earned_sek":16214.0,"fetch_period":"202604","id":19,"invoiced_sek":23000.0,"operations":["lift_only"],"order_value_sek":23000.0,"profit_margin_pct":43.6,"project_number":"PVL0692","project_type":"lifting_tool","status":"completed","tags":[],"title":"PVL0692 #215 - Lyftredskap kugg Z4","tool_self_weight_kg":2.4,"year":2025},{"actual_hours":142.2,"actual_total_cost":408729.0,"admin_url":"/rfq/admin/projects/17","certifications":[],"complexity":"medium","customer":"ABB Robotics Sweden AB","description":"Lyftpl\u00e5tarna PVL0484-0001 \u00e4r prototyp lyftpl\u00e5tar med h\u00f6gre maxlast, utvecklade f\u00f6r att lyfta FS80-motorer tillsammans med tilthus (ax6) med ABB-robotverktyg. De \u00e4r avsedda att ers\u00e4tta de gamla lyftredskapen 3358-02XX som hade problem med \u00f6verlast vid lyft av motor tillsammans med tilthus. Pl\u00e5tarna monteras p\u00e5 befintligt verktyg och utv\u00e4rderas tillsammans med ABB Robotics.\n\nS\u00e4kerhetsinformation: Lyftpl\u00e5tarna \u00e4r utvecklade specifikt f\u00f6r att l\u00f6sa problemet med \u00f6verlast p\u00e5 de gamla redskapen 3358-02XX; maxlastkapaciteten \u00e4r h\u00f6gre \u00e4n f\u00f6reg\u00e5ngarna men specificeras inte i detta dokument.","drawing_number":"PVL0484-0001","earned_sek":228205.0,"fetch_period":"202604","id":17,"invoiced_sek":408729.0,"operations":["lift_only","tilt"],"order_value_sek":408729.0,"profit_margin_pct":64.6,"project_number":"PVL0484","project_type":"lifting_tool","status":"completed","tags":[],"title":"PVL0484 Lyftredskap Ax6 Lima (f\u00f6r \u00f6verbelastade PVL0238-0200)","tool_self_weight_kg":null,"year":2024},{"actual_hours":24.6,"actual_total_cost":33310.0,"admin_url":"/rfq/admin/projects/14","certifications":[],"complexity":"","customer":"ABB Robotics and Motion","description":"","drawing_number":"","earned_sek":18050.0,"fetch_period":"202604","id":14,"invoiced_sek":33310.0,"operations":["ink\u00f6p"],"order_value_sek":33310.0,"profit_margin_pct":56.0,"project_number":"PVL0549","project_type":"other","status":"completed","tags":[],"title":"PVL0549 Modifiering PVL0408 mekstopp","tool_self_weight_kg":null,"year":2024},{"actual_hours":60.9,"actual_total_cost":110712.0,"admin_url":"/rfq/admin/projects/13","certifications":[],"complexity":"complex","customer":"ABB Robotics and Motion","description":"PVL0559 is a custom-built drilling machine fixture/station designed for guided, repeatable drilling operations in a manufacturing environment. The assembly consists of a heavy steel weldment base frame with integrated linear rail guides along which a powered drill unit (visible in gold/orange) traverses. The fixture incorporates adjustable clamp/hold-down mechanisms, stop features, and what appears to be pneumatic or hydraulic clamping cylinders to locate and secure the workpiece during drilling.\n\nS\u00e4kerhetsinformation: Workpiece must be fully clamped and secured before initiating the drilling cycle; operators must follow lockout/tagout procedures during setup and maintenance.","drawing_number":"PVL0559","earned_sek":92983.0,"fetch_period":"202604","id":13,"invoiced_sek":110712.0,"operations":["slide_translate","clamp_hold","precision_position"],"order_value_sek":110712.0,"profit_margin_pct":45.2,"project_number":"PVL0559","project_type":"production_equipment","status":"completed","tags":[],"title":"PVL0559 Borrmaskin med f\u00e4ste","tool_self_weight_kg":null,"year":2024},{"actual_hours":179.8,"actual_total_cost":165520.0,"admin_url":"/rfq/admin/projects/12","certifications":[],"complexity":"medium","customer":"ABB Robotics and Motion","description":"PVL0532 is a manual lifting and turning tool ('lyft och v\u00e4ndredskap') designed for handling a robotic wrist/handled component, bearing ABB article number 3HAC095775-001. The tool consists of a steel mounting yoke (bygel) with a bracket, a swivel lifting eye rated 0.3 t, PTFE slide bearing washers and wrapped bushings to facilitate rotation, and an indexing plunger to lock the load at defined angular positions. The design allows the operator to both lift and rotate/turn the handled unit during assembly or maintenance operations.\n\nS\u00e4kerhetsinformation: CE label (PVL0532-0099) must be present on the tool. Lifting eye rated 0.3 t must not be overloaded; indexing plunger must be fully engaged before releasing the hoist load.","drawing_number":"PVL0532-0000","earned_sek":202908.0,"fetch_period":"202604","id":12,"invoiced_sek":165520.0,"operations":["lift_only","rotate_180","index_position"],"order_value_sek":165520.0,"profit_margin_pct":-22.6,"project_number":"PVL0532","project_type":"lifting_tool","status":"completed","tags":[],"title":"PVL0532 Lyft och v\u00e4ndredskap handled","tool_self_weight_kg":3.92,"year":2024}],"stats":{"active":3,"completed":5,"total":8,"total_earned":1378179.0,"total_order_value":2536307.0}}